Basic Info.
Test Furnace Size
L2245 X W1500 X H1600 (mm)
Product Description
Loose fill Maximum Temperature Test Equipment For Thermal Insulation Materials
Application:
It is suitable for the evaluation of maximum service temperature of heat insulation products such as loosely packed adiabatic material, felt, blanket, block, plate and prefabricated adiabatic tube shell.
Standard:
GB/T17430-2015: evaluation methods of thermal insulation materials the highest use temperature related standards are not equivalent
ASTM C411-82: the most high temperature heat insulation performance test method
ASTM C447-85: standards than the equivalent adiabatic material
ASTM C411-82: the most high temperature heat insulation performance test method
ASTM C447-85 thermal insulation materials the highest use temperature evaluation methods
ISO 8142: Appendix A test method for determining the maximum service temperature of prefabricated mineral cotton shells.
Parameters:
1. Heating plate: made of SUS304 stainless steel, with test area of 900*450mm, with protective layer around and width of 80mm.The lower surface of the heating plate shall be determined by no less than five thermocouples. Four of them are fixed on the diagonal of the heating area of the heating plate, and the distance from each Angle is 150mm. The fifth thermocouple is placed at the center of the heating plate.Any temperature shall not be lower than the requirements of the temperature measurement, and + 5% or + 15 ºC (those).
2. Heating tube: made of SUS304 stainless steel with length of 2M and nominal diameter of 88mm, 108mm and 133mm respectively.Three heating tubes are arranged side by side and the prefabricated insulation shell can be tested separately.The end of the heating tube shall be provided with a protective section not less than 75mm long and auxiliary heater to prevent excessive heat loss at the end of the specimen.A thermocouple is installed for each 0.3m of the heating tube to measure the surface temperature of the heating tube.Thermocouple at 90 ° intervals spiral around the heating pipe layout.Any temperature shall not be lower than the requirements of the temperature measurement, and the difference between + 5% or + 15 ºC (those).
3. Computers: one set of computers (at least meet the following requirements: first-line brand computers;CPU: INTEL i5-iii generation or above;Memory: 4G or above;Hard disk: over 500G;Serial port: control instrument operation;Display: over 20 inches LED LCD, over 1600*900 resolution;Windows xp.)One printer.Test the software set.
4. Prepare two sample tanks
Temperature measurement system | Thermocouple wire diameter is 5.0mm |
Measuring temperature | 0-500, 0 900, 0-1250 ºC (optional).Adopt PLC+ module to collect temperature. |
Control part | PLC module is adopted and microcomputer is used to control real-time display of thermal surface temperature curve and output report. |
The heating rate | 5 ºC / min or 3 ºC / min can be set. |
Temperature collection | it is collected every 2min and displayed by curve. |
Response time of thermocouple | <0.5s |
Temperature error | +/- 0.5 ºC |
Timing error | 1s/h |
Flat ruler and feeler | measure warp |
Test furnace size | L2245 x W1500 x H1600 (mm) |
Control box size | L500 x W500 x H1200 (mm). Control box is controlled by compute |
About daxian company:
DAXIAN's testing equipment are widely used in various field: scientific institutions, colleges, inspection institutions, auto parts, electronics, electricals, LED, photoelectricity, mobile, plasticand rubber, telecommunication, chemical industry, aerospace, building material and product, wire and cable,textile and fabrix, etc. All DAXIAN testing equipment are designed according to international test standards, such as ISO, ASTM, DIN, EN, GB, BS, JIS, UL, TAPPI, AATCC, IEC, VDE, CSA,CEN and so on.
One-stop logistics:
The equipment is placed in the wooden box, covered with bubble film, with good shock absorption, impact resistance, heat sealing, and has the advantages of non-toxic, odorless, moisture corrosion resistance, transparency.One-stop comprehensive service to let you rest assured.
FAQ:
Q:Are you factory or trading company?
A:We are factory in Dongguan City, Guangdong Province,China.Near Shenzhen or Guangzhou.
Q:What kind of certificate you have?
A:ISO9001 Certification, CE Certification.
Q:What is the lead time of the product?
A: Generally 7-15 days after getting the deposit.
Q:How about the payment term?
A: T/T, by cash, western union, or L/C.
Q:How about the warranty term?
A:1 year warranty,The engineer can teach the machine on the spot.
Address:
Changlian Industrial Building, 168 Zhenan West Road, Xiabian Community, Chang′an Town, Dongguan, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Electrical & Electronics, Instruments & Meters
Management System Certification:
ISO 9001, ISO 14064
Company Introduction:
Daxian′s testing equipment are widely used in various field: Scientific institutions, colleges, inspection institutions, auto parts, electronics, electricals, LED, photoelectricity, mobile, plasticand rubber, telecommunication, chemical industry, aerospace, building material and product, wire and cable, textile and fabrix, etc. All daxian testing equipment are designed according to international test standards, such as ISO, ASTM, DIN, en, GB, BS, JIS, UL, tappi, aatcc, IEC, VDE, CSA, cen and so on.
Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of " quality first, customer first and credit-based" since theestablishment of the company and always do our best to satisfy potential needsof our customers. Our company is sincerely willing to cooperate withenterprises from all over the world in order to realize a win-win situationsince the trend of economic globalization has developed with anirresistible force.