Basic Info.
Rainfall Time
1 ~ 9999 Minutes, Adjustable
Xenon Lamp Power
2.5kw(Life: 1600 Hours)
Product Description
Air Cooling / Water Cooling Xenon Lamp Aging Test Chamber
Overview:
Xenon lamp aging test chamber is a comprehensive climate test device. In addition to weather aging test, it can also test the light resistance of high grade materials, that is, polymer materials are exposed to artificial light source which simulates the sunlight spectrum through glass to evaluate the light resistance of materials.The simulation and enhancement tests were carried out from several major climatic factors, such as light energy, temperature, rainfall or condensation, and humidity.A xenon arc lamp simulating the total sunlight spectrum was used to reproduce the destructive light waves in different environments.It can be used in the selection of new materials, the improvement of existing materials or the assessment of changes in material composition after durability changes.
Main features:
Xenon lamp climate test box (vertical) is made of cold-rolled steel plate, electrostatic spraying or quality stainless steel plate, and the liner is quality stainless steel plate.The radiation light source is air-cooled all-solar spectrum xenon lamp, the radiation intensity can be automatically tracked, the blackboard temperature can be precisely controlled, the irradiation cycle, dark cycle, spray cycle can be set freely according to the relevant test standards or customer requirements.The controller of the climate resistance test box (desktop) of xenon lamp can select the imported touch screen controller or intelligent digital display controller according to the user's own needs.
The climate proof chamber of the xenon lamp is equipped with an ultraviolet irradiation sensor, which can correct the light energy loss caused by the lamp tube aging or any other changes.The ultraviolet irradiation sensor allows you to select the appropriate light irradiation during the test.The ultraviolet irradiation sensor can continuously monitor the light irradiation intensity in the irradiation room and accurately keep the irradiation intensity at the set value in operation by adjusting the power of the lamp tube.
The water spray cycle can simulate the dramatic temperature change and rain erosion effectively.Wood coatings, including paints and colouring agents, are subject to erosion due to frequent erosion from rain water.Recent studies have shown that this layer of rain washes away, exposing the material itself directly to damaging effects of UV and moisture.The rain water spraying function can reproduce such environmental conditions and enhance the weather aging test of some coatings.
Meet the standards:
Environmental test method for military equipment - solar radiation method
GB12831-86
GB/T1644.2-1999
GB/T8427-89
GB/T8430-98
GB/T1865-97
GB/ T5137.3-96
GB/T16259-96
GB/ T2423.24-95
Application industry:
Applicable to plastics, rubber, paint, coating, printing ink, paper, medicine, food, cosmetics, textiles, auto parts, packaging materials, building materials, electrical products, etc.It provides relevant environmental simulation and accelerated test for scientific research, product development and quality control and important test basis.
Performance index:
Humidity range | 65 ~ 98%R·H |
Rainfall time | 1 ~ 9999 minutes, adjustable |
Rainfall cycle | 1-240 min. Interval (break) adjustable |
Spectral wavelength | 290nm ~ 800nm (60w/m2) |
Xenon lamp power | 2.5kw(life: 1600 hours) |
Time controller | imported programmable time computer integrated controller (Kim jong-merle) |
Precision range | setting precision: plus or minus 0.1 ºC, humidity plus or minus 0.1 ºC temperature r. H. |
Instructions | precision temperature plus or minus 0.1 ºC, humidity plus or minus 0.1 ºC r. H |
Temperature and humidity sensor, Pt100 platinum resistance Ω/mv
Humidification system: external isolation type all stainless steel shallow surface evaporation type humidifier
Temperature: the blackboard bimetallic thermometer 55 ºC ~ 75 ºC the blackboard
Water supply system: the humidifying water supply is automatically controlled, and the xenon lamp is used to cool the circulating water
Temperature controller: imported microcomputer integrated temperature and humidity controller
Humidity: 30%~65%RH at irradiation
Circulatory system: temperature-resistant, low-noise air-conditioned motor, multi-vane centrifugal impeller
Outer box material: superior painted plastic color steel plate /SUS304 stainless steel fog surface line hair grain treatment
Inner box material: SUS304 quality stainless steel plate
Sample frame material: SUS304 quality stainless steel bar
Door frame insulation: high temperature aging resistant silicon rubber door sealing strip
Standard configuration: 1 set of radiation-proof glass window, 1 dynamic test stand, 2 xenon lamp tubes
Safety protection: leakage, short circuit, overtemperature, water shortage, motor overheating, over-current protection/controller power failure memory;To protect the equipment, all alarms will automatically shut off the power supply and send an audio prompt.
Power supply voltage: AC380V ± 10% 50 ± 0.5HZ three-phase five-wire system
Using the environment temperature: ± 5 ºC ~ 30 ºC + 85% r. H or less
Volume: 100 L x 97 W x155 H CM
Workshop size D * W * H: 500*600*500mm
About daxian company:
DAXIAN's testing equipment are widely used in various field: scientific institutions, colleges, inspection institutions, auto parts, electronics, electricals, LED, photoelectricity, mobile, plasticand rubber, telecommunication, chemical industry, aerospace, building material and product, wire and cable,textile and fabrix, etc. All DAXIAN testing equipment are designed according to international test standards, such as ISO, ASTM, DIN, EN, GB, BS, JIS, UL, TAPPI, AATCC, IEC, VDE, CSA,CEN and so on.
Our service:
1.High quality guarantee.
2.Shipment with professional documents.
3.Packing as your request, with photo before shipment.
4.Reply within 48 hours and provide solution within 3 working days
5.Professional after-service from our engineers.Provide test equipment assembly service, test equipment packaging service, remote technical consultation and overseas training.
Our advantages:
1.Professional technology support,Independent R&D and manufacturing, a number of patents, manufacturers direct sales.
2.Full experience of large numbers containers loading in Chinese sea port.
3.Fast shipment by reputed shipping line.
4.Best service after shipment with emails.
5.We are professional test equipment manufaturer in China with excellent experience and skills, also have best quality products.
6.In-time after-sale service.
7. 95% of the products are exported to foreign countries.
8. 90% of our customers think our service is "excellent".Our products: 1. Fire Testing Equipment2. Construction Materials Fire Tester
3. Wire and Cable Fire Tester
4. Environmental Test Chamber
5. Textile Testing Equipment
6. Plastic Testing Equipment
7. Tensile Testing Machine
FAQ:
Q:Are you factory or trading company?
A:We are factory in Dongguan City, Guangdong Province,China.Near Shenzhen or Guangzhou.
Q:What kind of certificate you have?
A:ISO9001 Certification, CE Certification.
Q:What is the lead time of the product?
A: Generally 7-15 days after getting the deposit.
Q:How about the payment term?
A: T/T, by cash, western union, or L/C.
Q:How about the warranty term?
A:1 year warranty,The engineer can teach the machine on the spot.
One-stop logistics:
The equipment is placed in the wooden box, covered with bubble film, with good shock absorption, impact resistance, heat sealing, and has the advantages of non-toxic, odorless, moisture corrosion resistance, transparency.One-stop comprehensive service to let you rest assured.
Address:
Changlian Industrial Building, 168 Zhenan West Road, Xiabian Community, Chang′an Town, Dongguan, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Electrical & Electronics, Instruments & Meters
Management System Certification:
ISO 9001, ISO 14064
Company Introduction:
Daxian′s testing equipment are widely used in various field: Scientific institutions, colleges, inspection institutions, auto parts, electronics, electricals, LED, photoelectricity, mobile, plasticand rubber, telecommunication, chemical industry, aerospace, building material and product, wire and cable, textile and fabrix, etc. All daxian testing equipment are designed according to international test standards, such as ISO, ASTM, DIN, en, GB, BS, JIS, UL, tappi, aatcc, IEC, VDE, CSA, cen and so on.
Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of " quality first, customer first and credit-based" since theestablishment of the company and always do our best to satisfy potential needsof our customers. Our company is sincerely willing to cooperate withenterprises from all over the world in order to realize a win-win situationsince the trend of economic globalization has developed with anirresistible force.